What is
NP3? NP3 is a
surface treatment for steel and metal alloys that
combines sub-micron particles of PTFE
(polytetrafluoroethylene), otherwise known as Teflon, with electroless nickel.
NP3 - THE
PROCESS The application
of NP3 is auto-catalytic, that is, not requiring any
form of electricity. This process is preferable to
standard electrolytic plating as all active surfaces are
evenly plated, which is not the case with any
electrolytically deposited coating. With Robar's
well-equipped laboratory, coating thickness can be
maintained to within .0002" or two ten thousandths of one
inch, guaranteeing consistent quality coatings. With the
PTFE evenly distributed and locked into the nickel-phosphorus matrix, NP3 is a true composite. If wear
occurs, fresh particles of PTFE are exposed to keep
the opposing surfaces lubricated throughout the life of
the coating.
NP3 - THE
ADVANTAGES
Very accurate and even coatings on all activated
surfaces.
No lubrication is needed on opposing surfaces.
Cleaning is minimal, usually requiring only a soft
cloth.
Permits firing for longer periods of time between cleaning,
as dirt and powder residue has no wet or oily surface to cling to.
NP3 has a micro hardness of 48-51 Rockwell as plated
(nickel matrix).
NP3 is very corrosion resistant, a 1 mil (.001)
coating exceeding a 240 hour salt spray test.
NP3 has a high lubricity and low friction
co-efficient; therefore, the life expectancy of a
firearm will be greatly increased due to reduced
friction wear.
The coating is strippable with no effect on the base
metal, allowing other coatings to be applied or a new
coating of NP3 to be applied, if necessary.
NP3 plated onto stainless steel guns will prevent
galling, a problem common with stainless steel.
NP3 is a satin gray, non-reflective color ideal for
all firearms.
NP3 can be plated to all internal parts giving a
smoothness to the action not found with any other
coating.
In cases where the NP3 has been perforated, the
corrosion shows no tendency to spread or migrate under
the coating.
NP3 is guaranteed against corrosion, peeling or flaking for the lifetime of the firearm.
|